Take back the keys!

by **bowl ah chilli** » Sun Mar 09, 2008 1:24 pm

i have a new valve cover that needs notched in each sleeve for the coilpacks. and also each sleeve needs bored out 40,000 of an inch.

i have savwkos valve cover already done, that i can take to the shop so they can copy it, here is a pic (along with him watermarked in it lol)

Anyone know where i can take this to get done?

by **Rb25Cory** » Sun Mar 09, 2008 2:17 pm

any machine shop with a vertical mill can do it up. call around. what a flamer ^^

by **bowl ah chilli** » Sun Mar 09, 2008 2:33 pm

Rb25Cory wrote:any machine shop with a vertical mill can do it up. call around.

thas my point...dont know where to call around to lol.

im gonna just bust out the phone book eh

by **Rb25Cory** » Sun Mar 09, 2008 3:37 pm

bowl ah chilli wrote:
Rb25Cory wrote:any machine shop with a vertical mill can do it up. call around.

thas my point...dont know where to call around to lol.

im gonna just bust out the phone book eh

might be the best bet, try Forbush(spelling?) Machine, they are right over by Star Supply. Hes a good guy.

by **bowl ah chilli** » Sun Mar 09, 2008 6:27 pm

Rb25Cory wrote:
bowl ah chilli wrote:
Rb25Cory wrote:any machine shop with a vertical mill can do it up. call around.

thas my point...dont know where to call around to lol.

im gonna just bust out the phone book eh

might be the best bet, try Forbush(spelling?) Machine, they are right over by Star Supply. Hes a good guy.

ok ill look for them first

by **Andrew Bozick** » Sun Mar 09, 2008 10:00 pm

boardman machine its a small shop but does good work. Their number should be in the phone book.

by **BOOST3DWRX** » Mon Mar 10, 2008 1:10 am

http://profile.myspace.com/index.cfm?fuseaction=user.viewprofile&friendid=148540448

Message him on there he is on these boards too just tell him I sent you

by **boosted_em1** » Mon Mar 10, 2008 8:14 am

PMC precision machine control
its here in north jackson my buddy works there i could probably get a deal..

by **BOOST3DWRX** » Mon Mar 10, 2008 8:54 am

boosted_em1 wrote:PMC precision machine control
its here in north jackson my buddy works there i could probably get a deal..

Who do you know that works there I use to work there?

and my uncle owns it

by **TurboCrvtec** » Mon Mar 10, 2008 9:00 am

I know someone doing my motor up in lorain. He isn't exactly local but he does excellent work. Does everything from 4cyl to v8.

by **bowl ah chilli** » Mon Mar 10, 2008 9:44 am

My bottom end is at boardman engine as we speak lol. I was gonna have them do it. I hit u up matt. Ill take it there. Wat time they open to? I'm off thurs, work to 5 every other day during week. Text me matt

by **BOOST3DWRX** » Mon Mar 10, 2008 10:08 am

bowl ah chilli wrote:My bottom end is at boardman engine as we speak lol. I was gonna have them do it. I hit u up matt. Ill take it there. Wat time they open to? I'm off thurs, work to 5 every other day during week. Text me matt

IDK if PMC will do outside machine work...

Im going to a guy today to talk about some stuff Ill ask him how much he would charge what is your number AJ

by **Rb25Cory** » Mon Mar 10, 2008 10:14 am

bowl ah chilli wrote:My bottom end is at boardman engine as we speak lol. I was gonna have them do it. I hit u up matt. Ill take it there. Wat time they open to? I'm off thurs, work to 5 every other day during week. Text me matt

Howard is a nice guy and does good work from what I have seen thus far.

by **boosted_em1** » Mon Mar 10, 2008 11:38 am

my buddy andrew works there. he has done a couple little things for me. so idk you probably no more than me dave since your uncle owns it lol. i just figured id throw it out there

by **BOOST3DWRX** » Mon Mar 10, 2008 11:40 am

Yah they have done some stuff for me as well I know alot of the guys in the shop I used to work there haha

Just as long as my uncle doesn't find out you shouldn't have a problem :thumbsup:

by **bowl ah chilli** » Mon Mar 10, 2008 11:43 am

sent you a PM dave...

i need it done this week so i can take both valve covers back to my polisher :thumbsup:

boardman engine is putting my bottom end back together now :mrgreen:

by **RSbeast** » Mon Mar 10, 2008 3:26 pm

40,000 s huh....lol

Stay away from my car thanks :lol:

.040

by **bowl ah chilli** » Mon Mar 10, 2008 5:20 pm

RSbeast wrote:40,000 s huh....lol

Stay away from my car thanks

.040

thats why im just a bowl ah chilli, im not as cool as you with your V8 :roll:

by **BOOST3DWRX** » Mon Mar 10, 2008 10:40 pm

AJ you get my text?

by **Nick Serra** » Mon Mar 10, 2008 10:45 pm

BOOST3DWRX wrote:AJ you get my text?

Dave, noone wants to talk to you. Accept it!

by **Running925** » Mon Mar 10, 2008 10:51 pm

RSbeast wrote:40,000 s huh....lol

Stay away from my car thanks

.040

LOL thats comical.

As far as machine shops go.

You could try
-Jerry's Crank & Sleeve in girard (slow but extreamly good work)
-B & B Automotive in Warren (usually pretty quck turn around)
-Union Auto in Warren (also decently quck turn around)

by **RSbeast** » Tue Mar 11, 2008 7:18 am

LOL you 4cyl guys have no sense of humor lol :lol:

I guess v8's are the only cars to use REAL figures while assembling :shock:

But I guess I don't know dick about 4cyls...or boost :roll:

...maybe it's just a German thing :mrgreen:

by **RSbeast** » Tue Mar 11, 2008 7:40 am

Hi Tony!

Welcome to the e-drama/excuse/whining website! :mrgreen:

by **Nick Serra** » Tue Mar 11, 2008 8:04 am

RSbeast wrote:Welcome to the e-drama/excuse/whining website!

by **Rb25Cory** » Tue Mar 11, 2008 8:11 am

RSbeast wrote:

Welcome to the e-drama/excuse/whining website!

Yeah I'm not sure why people just jump straight to the defensive, theres no reason v8 and i4 guys cant get along. Its all in good fun in my eyes.

Its possible AJ has never had to write it out before, but it is .040 or just 40 over.

by **Running925** » Tue Mar 11, 2008 8:39 am

RSbeast wrote:Hi Tony!

Welcome to the e-drama/excuse/whining website!

waz up bro! can't wait to be crusin again!

I should have my new Tig within the next couple months.. i really think we should build you a nice turbo setup for that stang of yours!

by **95gsx** » Tue Mar 11, 2008 9:15 am

Not sure if you already made arrangements w/ dave, but my g/f's dad owns a machine shop. It's called RT Manufacturing and is in East Palestine. I work there during breaks from school. If you're interested, I can give you his cell number and he could tell you exactly how much and if they could do it. Not sure why they wouldn't be able to. The one guy up there is really good on the mill.

by **bowl ah chilli** » Tue Mar 11, 2008 9:28 am

Running925 wrote:
RSbeast wrote:40,000 s huh....lol

Stay away from my car thanks

.040

LOL thats comical.

As far as machine shops go.

You could try
-Jerry's Crank & Sleeve in girard (slow but extreamly good work)
-B & B Automotive in Warren (usually pretty quck turn around)
-Union Auto in Warren (also decently quck turn around)

im gonna call em up on thurs and see if i can take it down to them, thas my day off, assuming all/most shops close at 5pm.

and 95gsx ill let you know what i find out.

by **bowl ah chilli** » Tue Mar 11, 2008 9:29 am

the websites fun from time to time. helps with local things.

by **DSMu4ia** » Fri Mar 14, 2008 5:09 pm

Call Larry at Mad 4wd, most knowledgeable people within an hour radius.

http://maps.google.com/maps?f=l&hl=en&g ... cDwCw&cd=1

Take back the keys!

looking for local machine shop to do this...

looking for local machine shop to do this...

Who is online