Take back the keys!

ERABBIT23 wrote:60 ft: 1.6779
1/8: 7.0270
1/8MPH: 101.03
1/4: 10.8145
1/4MPH: 130.47

Car is still on the stock head and the little 60 trim turbo. Getting a new turbo within the next couple weeks from AGP Turbo who is now my sponsor for alot of stuff. I am hopefully going for the 5 speed record next year which is 10.51 in a SRT!

http://www.youtube.com/watch?v=OTp1x9As ... re=related

nice!

.

PontiacChris wrote:2002 grand am.
2.2l ecotec

2 seconds

Crux Record!

first season my DSM ran only did T/T on 1/8th mi
60'et 1.929
1/8th 8.52@83mph

highly built motor still running evo III 16g/ 720cc injectors
extreme boost creep at 20+psi (gauge only goes to 20)
24.5"slicks@7psi, open Dif, still no power to ground

send us an invite to one of your events, id love to see what i do in 1/4mi

nice set up

extreme boost creep past 20 psi but the gauge only goes to 20 psi ?? im confused

2003 Mustang GT
original factory street tires so 60ft times sucked
13.30@104
H-Pipe, Flows, 75shot

my stock t/a:
1/8 mile
6.89@105 no squeeze

SVT THIS wrote:my stock t/a:
1/8 mile
6.89@105 no squeeze

bullshit. whats your definiton of stock?

New Time on the Proto-Type turbo I am running for AGP Turbo:

60 ft: 1.692
1/8: 7.028
1/8MPH: 104.31
1/4: 10.733
1/4MPH: 137.26

Car has the head torn off and I am waiting for the head to come back from being ported I went with +1 intake +3 exhaust valves. Car made 520/550 last time at the dyno and the head lifted on the car at 29psi. This turbo is sufficient to 38psi

I am hoping for 10.39 out of the car next year!

http://www.youtube.com/watch?v=S8FQNUbT ... annel_page

Also a goal for next year is to make a 10 second pass at Quaker and not break like I always do. That track sucks for track prep!

ERABBIT23 wrote:
Car has the head torn off and I am waiting for the head to come back from being ported I went with +1 intake +3 exhaust valves. Car made 520/550 last time at the dyno and the head lifted on the car at 29psi.

whos doing the headwork for you??

crx ef 88 wrote:

ERABBIT23 wrote:

whos doing the headwork for you??

Hey man minors in lowrdstown does good work if u were wanting to get head work done. i know someone who got a olds 426 built there and they did a good job. And thats were i take my stuff at. There pretty cheap to but they sometimes take a while....... Just saying..