FS: A bunch of AN hoses/fittings/etc
Posted: Wed Jun 03, 2009 11:59 am
Ok here goes... Trying to clean my garage up before moving..
AN Hose:
28" of Aeroquip -8 Pushlok. Black.
9' of Aeroquip -10 Pushlok. Black
28" of -10 SS Braided
36" of -8 SS Braided
20" of DEI Firesleeve, fits -6 or -8. Black
18" of DEI Firesleeve, fits -8 or -10. Black
3' of -4 TFE SS Braided
18" Pre-made -4 with straight fittings on each end. Turbo feed style.
Fittings:
4x -6 straight
2x -8 straight
1x -6 to -4 reducer, and then -4 barb fitting. Used on a FPR to adapt to the factory return line.
2x -10 Aluminum weld bungs
1x Aeroquip -8 male to -8 male. with 1/8th npt bung in it. Part FBM2184
2x Aeroquip -8 straight pushlok fittings
1x Aeroquip -10 straight pushlok fitting
1x Aeroquip -10 45' pushlok fitting
1x ERL934106. -6 to -6 low profile. Female to Female. 90'. Good for putting a FRP on the end of a fuel rail.
1x -6 to -6, 45', female to female.
1x -8 to -6 reducer. male to male.
10 pack of -6 o-rings. 2 or 3 are gone out of the package.
1x -8 AN Male to 7/8"-14 O-ring Port
2x 90degree -4 TFE hose ends. Buy with the 3' of TFE hose above.
I encourage you to buy it all, it will be CHEAP.
I obviously will need to package some stuff together to make it feasible to ship, aka I won't ship you one fitting.
Post in this thread what you want. Thanks.
AN Hose:
28" of Aeroquip -8 Pushlok. Black.
9' of Aeroquip -10 Pushlok. Black
28" of -10 SS Braided
36" of -8 SS Braided
20" of DEI Firesleeve, fits -6 or -8. Black
18" of DEI Firesleeve, fits -8 or -10. Black
3' of -4 TFE SS Braided
18" Pre-made -4 with straight fittings on each end. Turbo feed style.
Fittings:
4x -6 straight
2x -8 straight
1x -6 to -4 reducer, and then -4 barb fitting. Used on a FPR to adapt to the factory return line.
2x -10 Aluminum weld bungs
1x Aeroquip -8 male to -8 male. with 1/8th npt bung in it. Part FBM2184
2x Aeroquip -8 straight pushlok fittings
1x Aeroquip -10 straight pushlok fitting
1x Aeroquip -10 45' pushlok fitting
1x ERL934106. -6 to -6 low profile. Female to Female. 90'. Good for putting a FRP on the end of a fuel rail.
1x -6 to -6, 45', female to female.
1x -8 to -6 reducer. male to male.
10 pack of -6 o-rings. 2 or 3 are gone out of the package.
1x -8 AN Male to 7/8"-14 O-ring Port
2x 90degree -4 TFE hose ends. Buy with the 3' of TFE hose above.
I encourage you to buy it all, it will be CHEAP.
I obviously will need to package some stuff together to make it feasible to ship, aka I won't ship you one fitting.
Post in this thread what you want. Thanks.