Take back the keys!

i have a new valve cover that needs notched in each sleeve for the coilpacks. and also each sleeve needs bored out 40,000 of an inch.

i have savwkos valve cover already done, that i can take to the shop so they can copy it, here is a pic (along with him watermarked in it lol)

Anyone know where i can take this to get done?

any machine shop with a vertical mill can do it up. call around. what a flamer ^^

Rb25Cory wrote:any machine shop with a vertical mill can do it up. call around.

thas my point...dont know where to call around to lol.

im gonna just bust out the phone book eh

bowl ah chilli wrote:

Rb25Cory wrote:any machine shop with a vertical mill can do it up. call around.

thas my point...dont know where to call around to lol.

im gonna just bust out the phone book eh

might be the best bet, try Forbush(spelling?) Machine, they are right over by Star Supply. Hes a good guy.

Rb25Cory wrote:

bowl ah chilli wrote:

Rb25Cory wrote:any machine shop with a vertical mill can do it up. call around.

thas my point...dont know where to call around to lol.

im gonna just bust out the phone book eh

might be the best bet, try Forbush(spelling?) Machine, they are right over by Star Supply. Hes a good guy.

ok ill look for them first

boardman machine its a small shop but does good work. Their number should be in the phone book.

http://profile.myspace.com/index.cfm?fuseaction=user.viewprofile&friendid=148540448

Message him on there he is on these boards too just tell him I sent you

PMC precision machine control
its here in north jackson my buddy works there i could probably get a deal..

boosted_em1 wrote:PMC precision machine control
its here in north jackson my buddy works there i could probably get a deal..

Who do you know that works there I use to work there?

and my uncle owns it

I know someone doing my motor up in lorain. He isn't exactly local but he does excellent work. Does everything from 4cyl to v8.

My bottom end is at boardman engine as we speak lol. I was gonna have them do it. I hit u up matt. Ill take it there. Wat time they open to? I'm off thurs, work to 5 every other day during week. Text me matt

bowl ah chilli wrote:My bottom end is at boardman engine as we speak lol. I was gonna have them do it. I hit u up matt. Ill take it there. Wat time they open to? I'm off thurs, work to 5 every other day during week. Text me matt

IDK if PMC will do outside machine work...

Im going to a guy today to talk about some stuff Ill ask him how much he would charge what is your number AJ

bowl ah chilli wrote:My bottom end is at boardman engine as we speak lol. I was gonna have them do it. I hit u up matt. Ill take it there. Wat time they open to? I'm off thurs, work to 5 every other day during week. Text me matt

Howard is a nice guy and does good work from what I have seen thus far.

my buddy andrew works there. he has done a couple little things for me. so idk you probably no more than me dave since your uncle owns it lol. i just figured id throw it out there

Yah they have done some stuff for me as well I know alot of the guys in the shop I used to work there haha

Just as long as my uncle doesn't find out you shouldn't have a problem

sent you a PM dave...

i need it done this week so i can take both valve covers back to my polisher

boardman engine is putting my bottom end back together now

40,000 s huh....lol


Stay away from my car thanks

.040

RSbeast wrote:40,000 s huh....lol


Stay away from my car thanks

.040

thats why im just a bowl ah chilli, im not as cool as you with your V8

AJ you get my text?

BOOST3DWRX wrote:AJ you get my text?

Dave, noone wants to talk to you. Accept it!

RSbeast wrote:40,000 s huh....lol


Stay away from my car thanks

.040

LOL thats comical.

As far as machine shops go.

You could try
-Jerry's Crank & Sleeve in girard (slow but extreamly good work)
-B & B Automotive in Warren (usually pretty quck turn around)
-Union Auto in Warren (also decently quck turn around)

LOL you 4cyl guys have no sense of humor lol

I guess v8's are the only cars to use REAL figures while assembling

But I guess I don't know dick about 4cyls...or boost



...maybe it's just a German thing

Hi Tony!


Welcome to the e-drama/excuse/whining website!

RSbeast wrote:Welcome to the e-drama/excuse/whining website!

RSbeast wrote:

Welcome to the e-drama/excuse/whining website!

Yeah I'm not sure why people just jump straight to the defensive, theres no reason v8 and i4 guys cant get along. Its all in good fun in my eyes.

Its possible AJ has never had to write it out before, but it is .040 or just 40 over.

RSbeast wrote:Hi Tony!


Welcome to the e-drama/excuse/whining website!

waz up bro! can't wait to be crusin again!

I should have my new Tig within the next couple months.. i really think we should build you a nice turbo setup for that stang of yours!

Not sure if you already made arrangements w/ dave, but my g/f's dad owns a machine shop. It's called RT Manufacturing and is in East Palestine. I work there during breaks from school. If you're interested, I can give you his cell number and he could tell you exactly how much and if they could do it. Not sure why they wouldn't be able to. The one guy up there is really good on the mill.

Running925 wrote:

RSbeast wrote:40,000 s huh....lol


Stay away from my car thanks

.040

LOL thats comical.

As far as machine shops go.

You could try
-Jerry's Crank & Sleeve in girard (slow but extreamly good work)
-B & B Automotive in Warren (usually pretty quck turn around)
-Union Auto in Warren (also decently quck turn around)

im gonna call em up on thurs and see if i can take it down to them, thas my day off, assuming all/most shops close at 5pm.

and 95gsx ill let you know what i find out.

the websites fun from time to time. helps with local things.

Call Larry at Mad 4wd, most knowledgeable people within an hour radius.

http://maps.google.com/maps?f=l&hl=en&g ... cDwCw&cd=1